The Storm 8 from ENTTEC is a compact Ethernet-DMX converter. As one of a kind, the Storm 8 packs a huge punch and is powerful enough to control up to 4096 channels of DMX, with synchronization across all eight of its RJ45 outputs, up to 300m away.
The Storm 8’s robust 1U half-width hardware is enhanced by a mains input and an intuitive web interface. In addition, it features front LED indicators showing the status and connectivity of each unit, making installations both simple and fast. Furthermore, to increase the unit’s size to fit a full-width rack, the Storm 8 can be paired with ENTTEC’s ‘1RU 19inch ear kit. Finally, with input support for sACN and Art-Net 1, 2, 3, and 8 DMX outputs, controlling lighting fixtures and digital strips has never been easier than with this smart and compact Ethernet DMX converter.
- Storm 8 (PN:73909)
- Straight connect Ethernet lead (pn: 79102)
- IEC power cord (Australia & North America only)
- User manual
- 8 Universe Ethernet to DMX Node
- 8 DMX (RJ45) data output ports
- Web-based configuration
- 1 RJ45 Ethercon connector (10/100 Mbps)
- Supports Art-Net 1/2/3, sACN, and ESP
- Supports either LTP or HTP Merging (up to 2 sources).
- Supports DMX512/1990
- Refresh rate is configurable for each DMX output
- Each DMX output can be assigned up to one Ethernet Universe.
- Choose Static or Dynamic (DHCP) IP configuration (DHCP by default)
ArtNet to 8 DMX output ports RJ45 Ethernet Converter ■ Refresh rate is configurable for each DMX port (1Hz to 44Hz per second) ■ Mark After Break configurable for each DMX port ■ Break time is configurable for each DMX port (88ys to 1ms) ■ All configurations are made through web browser ■ Graphical User Interface for creating and editing ports in flow-chart oriented and documents data flow as you configure ■ Each DMX port has 1 to 512 configurable channels ■ 8 DMX (RJ45) data output ports. ■ 1x RJ45 ethernet connector ■ 1x RS232 connector input for profile selection via serial command ■ 2x USB host connector (un-used) ■ Jumbo Frame support ■ LCD display provide status information on system and data flow ■ Op Environment: 0°-50°C ■ Insulation Rating: IP20 ■ Approvals: CE ■ Power Input: 90 – 260vAC 50/60Hz ■ Power Consumption: 15 to 20 W ■ Size: 7.53" L x 4.14" W x 1.75" H (191 x 105 x 4.14mm) ■ Weight: 1.8 kgs/1.65 lbs
Country Of Origin: Australia
Warranty: 1 Year Limited