ENTTEC: 71521 OCTO - DIN Mount

Product Code
Product Description
71521 OCTO - DIN Mount

Retail Price: $ 235.00
Price:  $ 223.25 Each

Category: Controllers
Sub-Category: Pixel LED Controls

Manufacturer: ENTTEC
Manufacturer No: 71521

Quantity per Case: 1
Availability: In Stock

Status: Active Status Info


71521 OCTO - DIN Mount

ENTTEC’s OCTO is a robust and reliable installation grade LED controller engineered to take any architectural, commercial or entertainment project to the next level.

With 8 universes of eDMX to pixel protocol conversion and network chaining between devices, the OCTO allows for fast deployment of LED strips and pixel dot systems compatible with a wide range of devices.

The OCTO is packed with installer-friendly features such as an identify button to check correct wiring, temperature monitoring, a wide input voltage range and intuitive configuration and management through its localhost web interface. All contained within a 4 DIN unit form factor.

The inbuilt Fx engine allows users to edit and create presets, using the OCTO’s web interface that can be configured to run standalone at power up


  • OCTO
  • TS35 DIN Clip & 2 (Please note: the OCTO is not provided with a power supply.) Torque T10 self-tapping screw
  • ‘Read Me’ card


  • Two * 4-universe pixel outputs with Data and Clock support.
  • Support for up to 8 universes of Art-Net, sACN, KiNet and ESP.
  • DIN Rail mount (attached)
  • 2-pin Terminal connector for power input
  • Each Plink output can be mapped to 2 Ethernet Universes.
  • 16 Universe Ethernet to Plink
  • Control a maximum of 2,720 RGB pixels
  • Easy to configure through any web browser
  • DHCP or Static IP address support.
  • Multiple pixel protocols support: Art-Net 1/2/3, Streaming ACN (sACN), Kling-net, ESP
  • Surface or TS35 DIN rail mounting option
  • Intuitive device configuration and updates through the inbuilt web interface.
  • Test/Reset button allows installers to quickly check wiring is correct without requiring a network connection.
  • Simple Fx generator mode to create and execute preset effects on the fly, configurable to play from power up.
  • Grouping functionality to reduce input channel count
Specifications: 8 universe eDMX to LED pixel controller with network chaining in a compact 4-module DIN-rail form factor ■ 2* Network (RJ45) ■ 2* SPI Output (4-Pin phoenix) connector ■ 1* Power (2-Pin phoenix) connector ■ LED indicators: Forward facing LED indicator, Network link / activity (integrated into RJ45 ports) ■ eDMX Input Protocol: Art-Net, sACN, Kling-net, ESP ■ Data output type: SPI (NZR) See website for all supported protocols. ■ Max. eDMX -> pixel conversion per device: 2048 channels ■ Max. pixels controllable per device: RGB 1360 (680 per port), RGBW 1024 (512 per port) ■ Max. Refresh Rate 46 frames per second (fps) ■ Network Speed: 10/100Base-T ■ Network Discovery: ENTTEC’s NMU software ■ Network configuration: Static (Default / DHCP ■ Integrated network switch ■ Recommended network device quantity per chain: Chains of up to 8 devices give optimum synchronization between outputs ■ Max. network device quantity per chain: 50 ■ Idenify/Reset button■ Configurable pixel color ordering■ Creation of effects and presets on the device ■ Play preset upon startup ■ Firmware Updates: Upgradable via web interface ■ Insulation Rating: IP20 ■ Environmental Operating Temperature : -4°F to 122°F (-20°C to 50°C) ■ Environmental Operating Humidity: 5 to 95% (non-condensing) ■ Cooling Method: Convection ■ Current Draw: 9vDC 400 mA, 48vDC 75 mA ■ Power Consumption: 5 W (Max.) ■ Max. heat dissipation 4.5 ■ Power Input: 4-60vDC ■ Size: 3.96" L x 3.07" W x 1.46" H (100.5 x 77.9 x 37.1 mm) ■ Weight: 0.11 kgs/0.24 lbs ■ Material: ABS plastic ■ Mounting Opetions: Surface mount, TS35 DIN Rail mount
Country Of Origin: Australia
Unspsc: 39112402
U.S.Tariff#: 8537.10.9060
Warranty: 1 Year Limited
Color: Black

Get Adobe Reader

Acrobat Reader® You may need Adobe Reader® to download or view files.
Pid: 13